Was going to save this but....

[The Snake Guru]

Little re-do on a cage....Banshee is ready to move up one...LOL

http://i143.photobucket.com/albums/r157/thesnakeguru/Caging%20Equip/Banshee1.jpg

~B~

[Basil]

Very cool!

[danthony428]

sweet cage dude

[Medusa]

Awesome!

[The Snake Guru]

Thanks much!
Get some better shots after she sheds and I put her in.

~B~

[steelheadchris]

Love the skulls

[The Snake Guru]

Thanks much.....gives it that Indiana Jones feel...LOL

~B~

[ReptileMan27]

Your cages and set-ups never fail to amaze me lol :)

[The Snake Guru]

Well thank ya! We aim to please! LOL

~B~

[Robilyn]

Cool Brad!

[The Snake Guru]

Thank ya Robyn!
~B~

[danthony428]

what kind of lighting is that and how is it in there, id like to see some pics of that

[The Snake Guru]

Ask and you shall recieve! LOL

http://i143.photobucket.com/albums/r157/thesnakeguru/Caging%20Equip/Lighting.jpg

Full Spectrum Flourescent and a "Puck" light - on a 12/12 cycle.

The Basking platform to left is hollow on the inside and wired up with heat cable top hits 90F
The bottom is perforated lexon with vents so the heat radiates below the shelf as well.

~B~

[danthony428]

so that little shelf has heat cable underneath it??? i was kinda thinking about stealing the shelf idea from you only making it shorter and putting a bulb over that side for the basking spot, could i enclose the bulb in aluminum mesh or chicken wire or something, or would it get to hot from the bulb, what do you use to wrap around your lights if theyre down in the cage?

[The Snake Guru]

Yup I used that Zoomed heat cable and looped around the underside of the shelf, works like a charm! Personally I would go this route instead of the bulb.....it would have to be a very small wattage bulb to keep the shelf around 90 when it's sitting that close to it. Cheaper in the log run to run as well. Basking bulbs work great but you should really have a minimum distance of 18" away from the actual bulb to get an even spread from the beam....to close and you localize your heat to much.

For enclosing bulbs I usually use 1/4'' or 1/2'' galvanized hardware wire (Square Holes) or the Rubbercoated stuff works reall well too. as long as you keep the wire about 2" or so away from the heat source it doesn't get hot enough to cause burns.

~B~

[APBTOwner]

Whats in the cage? Sorry if you said and I over looked it.

The skulls are a sweet touch. :high5:

[The Snake Guru]

Moved my Albino Retic in there....until her permanent cage gets finished this summer.

~B~